FHD-1080P on the Digital Wireless System (DTS) with high quality.

FHD Receiver and FHD Transmitter in a package that you connect to AHD Monitor and FHD camera to get wireless transmission.

You can also connect this with a set of non-HD products as long as both monitor and camera are without HD, so you cannot use an FHD camera with a monitor without HD and connect these.

Visor/Shutter camera can be connected via the transmitter, which, however, must be connected so that the transmitter receives a current signal when the hill is inserted (must have direct current, because then the visor is up all the time). However, cannot be used with the Tilt function.

Made of strong metal for a tough environment.

Loose Transmitter is mounted near the camera, can be connected to 12-32 volts.

Receivers are connected to the camera input of the monitor.

Through this system, you get a picture without interference, transmits a maximum of 300m and is IP69 rated.

If you need to buy a separate part, it is the article number as below:

Article number:
FHD-WipT-03, Transmitter
FHD-WipR-04, Receiver

When you already have these and one has broken, you buy a separate part. If you have a receiver/transmitter without HD, go to that page and buy parts, or exchange completely for this set.